UTP3226TS-PSB225 offers 24 10/100Mbps Ethernet RJ-45 ports featuring 30-watt 802.3at PoE+ and 2 1000Mbps RJ-45/SFP combo ports. The switch can be set to operate in 3 different working modes (Default, VLAN, and CCTV) through the DIP switch. When set to VLAN and CCTV modes, the switch supports PoE watchdog, allowing it to continuously detect PoE devices and reboot PoE devices automatically when a link failure or device malfunction is detected. This Ethernet switch is suitable for video security monitoring systems, network projects, etc.

PoE Provides Centralized Power Management

The switch provides 24 PoE ports and aligns with the standard of IEEE 802.3af/at, of which the total PoE budget is up to 225W. All the power would be sent from the back end (PoE switch).

Flexible Extension with SFP Slot

The switch provides two 1000M RJ-45/SFP Combo ports, which can be uplinked to the backbone switch and monitoring center over a long distance. The distance can be extended over 550 meters or more (according to the performance of the SFP module). It is well-suited for applications within enterprise data centers and distributions.

Support Three Working Modes

The switch provides three working modes (Default, VLAN, CCTV) through the built-in DIP switch. With the excellent troubleshooting function (PoE watchdog), it can monitor the network at any time.

>> Default

All ports are free to communicate, transmission distance: 0~100m.

>> VLAN

Downlink ports are isolated from each other but can communicate with Uplink ports. Transmission distance: 0~100m. The switch supports PoE watchdog under this mode.

>> CCTV

The transmission distance is extended up to 250 meters, but the rate is limited to 10Mbps. The switch supports PoE watchdog under this mode.

PoE Watchdog

When set to VLAN and CCTV modes, the switch supports PoE watchdog, allowing it to continuously detect PoE devices and reboot PoE devices automatically when a link failure or device malfunction is detected.

Robust Protection

The switches provide 6kV contact discharge and 8kV air discharge ESD protection. They also support 6kV surge immunity to improve product stability and protect users’ networks from devastating ESD attacks, which ensures the flow of operation does not fluctuate.

24*FE PoE+ + 2*GE Combo (RJ-45/SFP)

IEEE 802.3af/at

PoE budget: 225W

PoE watchdog

3 working modes (Default, CCTV, VLAN)