PoE Switch and Industrial switch Manufacturer
How to Close Port PoE
Function
1. Log in the administration interface as below:
Step 1:Physical connection:
Please double check if connecting to the
correct port (Note: uplink port and downlink ports all are OK, include the
optical-fiber port. But console port is not able).
Step 2: Please make sure your computer IP is
under the same subnet network with the switch.
For example: If the switch IP is
192.168.1.200, subnet mask: 255.255.255.0, then the computer IP should be
192.168.1.200 (X is from 1 to 254, apart from 200 to avoid IP inflict).
Step 3: Open
the IE internet explorer on your computer, delete whatever in the address bar
and type in http://192.168.1.200, then press Enter.
Step4: Type the username and password in the
login page. The default username and password both are admin, press OK.